to much oil

[snopro311]

Does anyone know how to adjust the oil intake for the 02 zr 440 sno pro i tried to refer to the thread for oil pump adjustment, but my oil pump is not the same from the firecats, the problem is it seems to inject to much oil into the cylinders, and oil , it seems excessive the oil comes out of the y pipe, like mad and then spills onto the ground any help i would appreciate it thanks

[jefteland]

THE OIL PUMP DOES ADJUST. YOU HAVE TO ADJUST THE CABLE. LOOSEN JAM NUTS THIS IS HOW YOU WOULD ADJUST. TURN UPPER NUT TOWARDS UPPER END WILL GIVE IT LESS OIL BE CAREFUL THAT YOU DON'T DO TO MUCH. DO THE SAME AS THE LINK OIL PUMP SETTING

[snopro311]

thanks i will try that tonight

[snopro311]

do you give the cable more tension or less tension, pretty much loosen the nut, and let the cable go looser or pull it tighter, do you know which way?

[jefteland]

less tension = less oil

[snopro311]

thanks i appreciate it is there 2 adjustment points or just the tension on the cable, i know you mentioned the jam nuts but what is the oil pump setting?