Mudpro clutching help - ArcticChat.com - Arctic Cat Forum

Utility Performance / Technical info Utility ATV Performance and Technical Discussions about specific mods, engine upgrades!

 4Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 35 Old 06-17-2017, 05:57 PM Thread Starter
Senior Member
 
Senior Member
Join Date: Mar 2006
Location: Sept iles QC Canada
Posts: 106
Thanks: 0
Thanked 7 Times in 7 Posts
Sled: 2017 summit 850
ATV: Ac 2014 mud pro 700. AC 2016 mudpro 700
2007 Mileage: none
Mudpro clutching help

Ok guys i need some anwsers here , since speedwerx cant anwser my questions , I upgrades to 30" zilla i added a speedwerx clutch kit. I used the low engagement wet clutch spring #42 im clock at B2 and the only mod that i have is 3,6 diff . The only thing that i can see is a lost in rpm in H And L . Any help would be appreciate thanks
F7cansnopro is offline  
Sponsored Links
Advertisement
 
post #2 of 35 Old 06-17-2017, 07:12 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: calgary ab
Posts: 28,738
Thanks: 2,914
Thanked 2,667 Times in 2,452 Posts
Garage
ATV: 07 500 auto 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
30" zilla would have been fine with stick clutching. They are clutched pretty well from the factory.

Does the kit say clock to B-2 ?

Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--
2013 700 XT trv eps stock



It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
post #3 of 35 Old 06-17-2017, 08:53 PM Thread Starter
Senior Member
 
Senior Member
Join Date: Mar 2006
Location: Sept iles QC Canada
Posts: 106
Thanks: 0
Thanked 7 Times in 7 Posts
Sled: 2017 summit 850
ATV: Ac 2014 mud pro 700. AC 2016 mudpro 700
2007 Mileage: none
The kit says 28" stock to 30" tires , i clock to B2 since i have 3,6 diff , but the clutch kit says to clock to B4
F7cansnopro is offline  
Sponsored Links
Advertisement
 
post #4 of 35 Old 06-17-2017, 10:20 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: calgary ab
Posts: 28,738
Thanks: 2,914
Thanked 2,667 Times in 2,452 Posts
Garage
ATV: 07 500 auto 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
You swapped out your 3.1 Diff's?

Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--
2013 700 XT trv eps stock



It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
post #5 of 35 Old 06-18-2017, 07:30 AM Thread Starter
Senior Member
 
Senior Member
Join Date: Mar 2006
Location: Sept iles QC Canada
Posts: 106
Thanks: 0
Thanked 7 Times in 7 Posts
Sled: 2017 summit 850
ATV: Ac 2014 mud pro 700. AC 2016 mudpro 700
2007 Mileage: none
Yes , and i ask them if the kit would still fit , and they said yes
F7cansnopro is offline  
post #6 of 35 Old 06-18-2017, 09:22 AM
Team ArcticChat
 
AlexG.'s Avatar
Team ArcticChat
 
Team ArcticChat
Join Date: Nov 2013
Location: Virginia Beach, Va.
Posts: 1,018
Thanks: 133
Thanked 138 Times in 122 Posts
ATV: 2013 550 Core
#42 raise the engagement rpms not lower

Sent from my VS986 using Tapatalk

2013 550 Core, AC Hand Guards, Zilla 27's, RTR Steer Light & Shock Bushings, Auto Resetting Brkrs, Fnt & Rr Brush/Bumpers, RAM X Mnt & Cup Hldr, Champion 3klbs Winch, AmSteel 3.5Klbs Syn Rope, Braided Hook Strap, Rowe Anodized Billet Alum Fairlead, Bostitch 28" wtrprf box, Reese Tow Hook, DYI Web Catchers, Koplin Overfenders, SpeedWerx Clutch Kit, DDM HID 35w 8K Kit, CREE LED light bar, green LED low beams and green Oznium 3W LED bullet running lights. 2" Moose Lift.
AlexG. is offline  
post #7 of 35 Old 06-18-2017, 09:23 AM
Team ArcticChat
 
AlexG.'s Avatar
Team ArcticChat
 
Team ArcticChat
Join Date: Nov 2013
Location: Virginia Beach, Va.
Posts: 1,018
Thanks: 133
Thanked 138 Times in 122 Posts
ATV: 2013 550 Core
And did you install the shim along with the rollers?

Sent from my VS986 using Tapatalk

2013 550 Core, AC Hand Guards, Zilla 27's, RTR Steer Light & Shock Bushings, Auto Resetting Brkrs, Fnt & Rr Brush/Bumpers, RAM X Mnt & Cup Hldr, Champion 3klbs Winch, AmSteel 3.5Klbs Syn Rope, Braided Hook Strap, Rowe Anodized Billet Alum Fairlead, Bostitch 28" wtrprf box, Reese Tow Hook, DYI Web Catchers, Koplin Overfenders, SpeedWerx Clutch Kit, DDM HID 35w 8K Kit, CREE LED light bar, green LED low beams and green Oznium 3W LED bullet running lights. 2" Moose Lift.
AlexG. is offline  
post #8 of 35 Old 06-18-2017, 10:49 AM Thread Starter
Senior Member
 
Senior Member
Join Date: Mar 2006
Location: Sept iles QC Canada
Posts: 106
Thanks: 0
Thanked 7 Times in 7 Posts
Sled: 2017 summit 850
ATV: Ac 2014 mud pro 700. AC 2016 mudpro 700
2007 Mileage: none
the kit was , speedwerx cam , secondary spring, wet clutch engagement springs ( i installed the #42 ), speedwerx smaller rollers. I clocked to B2 since my tires are not heavy , i lost rpm on the top end , thats the only result i have , should I clock to B4 and see what happens ? The instructions says to clock to B4.
F7cansnopro is offline  
post #9 of 35 Old 06-18-2017, 10:50 AM Thread Starter
Senior Member
 
Senior Member
Join Date: Mar 2006
Location: Sept iles QC Canada
Posts: 106
Thanks: 0
Thanked 7 Times in 7 Posts
Sled: 2017 summit 850
ATV: Ac 2014 mud pro 700. AC 2016 mudpro 700
2007 Mileage: none
No shim
F7cansnopro is offline  
post #10 of 35 Old 06-18-2017, 11:14 AM
Team ArcticChat
 
AlexG.'s Avatar
Team ArcticChat
 
Team ArcticChat
Join Date: Nov 2013
Location: Virginia Beach, Va.
Posts: 1,018
Thanks: 133
Thanked 138 Times in 122 Posts
ATV: 2013 550 Core
Your going to loose top end rpm using either the smaller lighter rollers or the shim. You gained low end launch. Especially by putting in the 42 springs. Your engagement rpms raised 200 to 400 rpms. Im not too sure specifically about the MP but mine worked best at B3.

Sent from my VS986 using Tapatalk

2013 550 Core, AC Hand Guards, Zilla 27's, RTR Steer Light & Shock Bushings, Auto Resetting Brkrs, Fnt & Rr Brush/Bumpers, RAM X Mnt & Cup Hldr, Champion 3klbs Winch, AmSteel 3.5Klbs Syn Rope, Braided Hook Strap, Rowe Anodized Billet Alum Fairlead, Bostitch 28" wtrprf box, Reese Tow Hook, DYI Web Catchers, Koplin Overfenders, SpeedWerx Clutch Kit, DDM HID 35w 8K Kit, CREE LED light bar, green LED low beams and green Oznium 3W LED bullet running lights. 2" Moose Lift.
AlexG. is offline  
Reply

  Lower Navigation
Go Back   ArcticChat.com - Arctic Cat Forum > ATV's > Utility ATV repair and maintenance & Troubleshooting > Utility Performance / Technical info

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ArcticChat.com - Arctic Cat Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
need help with handguard options for mudpro Buddyp General ATV Discussion 5 05-08-2017 06:11 PM
2013 F 800 Clutching SnoXRacer Procross - Proclimb Chassis General Discussion 0 01-02-2017 04:31 PM
2012 MudPro 1000 running issues DoerksenZ07 General ATV Discussion 8 12-16-2016 08:30 AM
2006 crossfire 600 clutching ryanbrown General Snowmobile Discussion 5 12-10-2016 03:39 PM
Help clutching for 6k ft on 09m1000 and 08 m8 cumminshp M Series/Mtn. 0 11-27-2015 09:03 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome