Join Date: Aug 2011
Thanked 235 Times in 229 Posts
ATV: 02 Arctic Cat 500 Auto FIS
2010 Mileage: 860
2009 Mileage: 700ish
2007 Mileage: 1728
2006 Mileage: 1350
I did a little research for you and according the parts fishe at Country Cat the 1999 500 shares the same parts listed below.
Cylinder head 98-2002
Camshaft Gear 98-2002
If you don't mind me asking what happened that your in need of these parts?
When I first bought my 02 500 it burnt a little oil under hard acceleration so I took the top end apart to rebuild. My cylinder looked in great condition and even had most of the cross hatching with no scraps or scratches on the cylinder walls. Started rebuilding it and I went to put the top piston ring to check for ring end gap and it was double the necessary spec. Busted out my cylinder bore gauge and noticed the cylinder was .50 mm too large. Even with the cylinder looking in really good condition it was out of spec. I bought a liner from LA Sleeve and had then install it. They did a great job and wouldn't hesitate using them in the future. Btw your liner or cylinder is not a plated one. That started later like 2005 I believe. GL.
2002 Arctic Cat 500 FIS Auto
Port and Polished Cylinder Head w/ 3 angle valve job, port matched intake&exhaust and bowl work -- 700 H1 Camshaft -- Muffler mod w/ 1 3/4" Exhaust tip -- DEI Titanium Exhaust Wrap -- Uni Air Filter -- Dyno Jet Kit -- Slide and Spring Mods -- Epi Yellow Secondary Spring -- 4- 23g Rollers -- Innovate LC-1 Wideband w/ XD16 digital gauge -- Trail Tech Vapor Display -- RTR Bushings RTR Steerlites -- Genssi 7" LED Light Bar
Last edited by spooln30; 09-21-2014 at 03:08 AM.