Quote: Originally Posted by bronson
What's in a rebuild kit & where can I acquire it ?
I am no bike expert so a little bit more detail would be great.
No one seems to know where I can even get a new Carb.
Please Its goin a while now and I am struggling to get remedy
Thanks to all
You can get any part you need or the whole carb from> Country Cat Home
Its very easy to replace the float needle/seat, 1st remove the float bowl then slide out the float pin this will let the needle come out, then replace with new needle and reassemble in reverse order,then turn carb uprite and raise float untill the needle comes in contact with the carb,the float should be level with carb bowl if its not then use a small screwdriver to slightly bend the tab the needle rests on to make it level, then install the float bowl, and install back on the atv and it should be good to go.
2005 Arctic Cat 300
6K Diamond White H.I.D. headlights
L.E.D. reverse light
L.E.D. blue strobe lights
L.E.D. 880 strobes in the high beams
L.E.D. turn signals
American Eagle 3500lb winch
Synthetic winch rope
E3 Spark plug
DJ jet kit
Custom oil cooler
Oil temp gauge
Interstate AGM Battery
SYMTEC heated grips
Custom shift knob
Custom storage tube
High Lifter 2" Lift Kit
Sanny Suspension Bushings
TigerTail Tow System
1" Wheel Spacers
Vision 160 rims with AMS Swamp Fox tires(For Snow Plowing)
Douglas Quatrosport rims with Maxxis Bighorns V 2.0(For All Around Riding)
STI Slasher rims with custom grooved Outlaw M.S.T.s(For Playing In The Mud)