Arctic Chat : Arctic Cat Forum banner

diff actuators

955 views 4 replies 3 participants last post by  FirecatV2 
#1 ·
Can anyone tell me up a diff actuator from a 01ish to 05 ish 400 will work on my 10 mudpro 650. they look the same but not sure. I've got the 400 axles sitting here and we're free. mine is only going into 4wd some times. when it does is very noisey and if using diff lock it won't unlock most of the time. They 4wd light on the dash always goes on and off when switching so I'm sure it's lower
 
#2 ·
No , your machine has electric Diff lock the older models had manual Diff lock.
 
#4 ·
#5 ·
Did the 400 have diff lock even?????

I have had my actuator open and got the water out, sprayed it with wd40, cleaned it up, put it back together and it worked. I sealed the diff lock bellow with grease and siliconed the case to prevent future water intrusion.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top