2010 sp600 with rumble pack - ArcticChat.com - Arctic Cat Forum

 
LinkBack Thread Tools Display Modes
post #1 of 8 Old 12-05-2010, 04:48 PM Thread Starter
Junior Member
 
Junior Member
Join Date: Feb 2010
Location: Quebec
Posts: 17
Thanks: 0
Thanked 1 Time in 1 Post
Sled: snopro 600
2010 sp600 with rumble pack

Hi, i've bought a sno stuff rumble pack to put on my snopro 600, just for the fun of having that braaap sound. The sound is great but the sled just run like crap with the aftermarket can on it. IT's like it takes forever to build heat in the pipe and the sled always run like it is super rich. I just removed the rumble pack and put back the original muffler and the sled runs great.

My thoughts are that the ECT system is not working properly with the rumble pack on it. The exhaust flow is probably faster and leave the pipe colder so the ect sensor seems to not be able to take accurate measurement and just mess up the timing.

What do you guys thinking about it??? i mean .... so much people are running can on their sled, it should not be an issue.
snomaxpro is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 12-20-2010, 08:29 PM
Senior Member
 
SNOPRO RYDER's Avatar
 
Senior Member
Join Date: Dec 2010
Location: Caroga lake NY
Posts: 478
Thanks: 26
Thanked 10 Times in 10 Posts
Garage
Sled: 2010 sno pro 600
well seeing its a race sled and needs alot of ajusting and pre-mix you will need to get new jets and ajust your carb and clutch

WHEN IN DOUBT BRAAAAAAAAP IT OUT!
SNOPRO RYDER is offline  
post #3 of 8 Old 12-21-2010, 03:05 PM Thread Starter
Junior Member
 
Junior Member
Join Date: Feb 2010
Location: Quebec
Posts: 17
Thanks: 0
Thanked 1 Time in 1 Post
Sled: snopro 600
Ok well, i've got some news about the issue explained in the first post.
I finally pinpointed the problem with my sled. The was not running great with the snostuff silencer, was running better with the stock one but not that much and was fouling plugs each ride i've tried to make. I finally decided to look at the source itself and one piston dome was cracked and a part was missing. So now, 2 brand new pistons have been installed in the sled. run greats after a few carbs adjustments.

Needle jet on 2 clip and 1.75 turn on air screw.

No more plug fouling and got a great throttle response.
Will retry to run the rumble pack and post some comments about it.
snomaxpro is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 12-23-2010, 11:08 AM
Junior Member
 
Junior Member
Join Date: Dec 2005
Location: Clara City, MN
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
Sled: 04 F6 efi
ATV: Suzuki z400
how has it been running so far now? reason i'm asking is that my brother (16y.o.) is running the same sled with the same SS silencer on it and the sled never seems to run at it's best. He bought the sled with a Speedwerx can on it that seemed to sound terrible so he swapped out to the SnoStuff but the sled seems to take forever to warm up and then struggles to hit top end unless you really pin it. I rode it yesterday after letting it idle for 15mins and then being very nice to the throttle for another 10-20mins i hit the trail....after an hour or so of riding i had to go through town at about 15-20mph and it seemed to have lost all power thru that band of speed. it felt like the pluggs had fouled out but after i killed the power, made a phone call, started back up, and took off, the sled seemed to be back running fine? i cant figure this sled out and i'm trying to convince him to put the stock can back on to see the difference... any thoughts?
zimmer77 is offline  
post #5 of 8 Old 12-23-2010, 05:39 PM
Senior Member
 
SNOPRO RYDER's Avatar
 
Senior Member
Join Date: Dec 2010
Location: Caroga lake NY
Posts: 478
Thanks: 26
Thanked 10 Times in 10 Posts
Garage
Sled: 2010 sno pro 600
Carb ajusting or new jets, diff can needs diff setting. can also use some clutch ajusting when getting a diff can

WHEN IN DOUBT BRAAAAAAAAP IT OUT!
SNOPRO RYDER is offline  
post #6 of 8 Old 12-24-2010, 07:45 AM Thread Starter
Junior Member
 
Junior Member
Join Date: Feb 2010
Location: Quebec
Posts: 17
Thanks: 0
Thanked 1 Time in 1 Post
Sled: snopro 600
i have the exact same issue as you with the ss silencer. The sled does not
make decent power at all. Put the stock silencer on it and then she rip anything.
snomaxpro is offline  
post #7 of 8 Old 12-24-2010, 01:13 PM
Junior Member
 
Junior Member
Join Date: Dec 2005
Location: Clara City, MN
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
Sled: 04 F6 efi
ATV: Suzuki z400
sorry i didnt read the title but we are running the sp500 so we have EFI.. i am going to be reverting to the stock muffler now but are there any other thoughts before i decide to sell the SS can?
zimmer77 is offline  
post #8 of 8 Old 12-24-2010, 02:26 PM
Senior Member
 
SNOPRO RYDER's Avatar
 
Senior Member
Join Date: Dec 2010
Location: Caroga lake NY
Posts: 478
Thanks: 26
Thanked 10 Times in 10 Posts
Garage
Sled: 2010 sno pro 600
Yes. take it and the can to the dealer and have them put it on and ajust it for you. merry christmas

WHEN IN DOUBT BRAAAAAAAAP IT OUT!
SNOPRO RYDER is offline  
Reply

  Lower Navigation
Go Back   ArcticChat.com - Arctic Cat Forum > Snowmobiles > Arctic Cat Snowmobiles > SnoPro Chassis 2010 - 2013

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ArcticChat.com - Arctic Cat Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
ss rumble pack firecatgg03 XFR/Firecat/Sabercat 1 12-31-2005 03:43 PM
rumble pack firecatgg03 XFR/Firecat/Sabercat 2 12-29-2005 07:06 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome